Roof sheathing cleaning
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Home inspector found dark staining on your roof sheathing? Seeing frost on nail tips in winter? Breffni Remediation connects you with licensed and insured independent attic mold removal contractors in Commerce who clean the decking, correct the ventilation, and stop the condensation causing it.
Most attic growth comes down to three issues: exhaust fans venting into the attic, blocked soffit vents, and air leaks from the house below. Cleaning without fixing them doesn't last.
Answered day and night, holidays too.

Attic jobs fail when they stop at cleaning. These are the standards we look for in the contractors we refer.

The quote separates sheathing cleaning, insulation work, and ventilation corrections, so you know what each fix costs before anyone climbs the ladder.
Dry ice and soda blasting lift growth off roof decking without soaking the wood, and HEPA vacuums and air scrubbers handle the dust and spores that come loose.
Need it done before closing or before new shingles go on? Tell the dispatcher and we'll prioritize your call.
Every independent contractor we connect you with is expected to be properly insured and licensed where required.
Here's what independent contractors in our network handle most often in attics.
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Exhaust fans that dump humid air into the attic are one of the most common causes. Ducts are extended and terminated through a roof or wall cap so moisture leaves the house.
Proper attic airflow needs open intake at the eaves and exhaust at the ridge. Contractors restore that balance.
Removing damaged insulation and sealing the gaps where house air escapes keeps the attic colder and drier.
Once the decking is clean, some contractors apply an antimicrobial or a fungicidal encapsulant coating. It doesn't replace cleaning or ventilation fixes, but it adds a layer of protection.

Four steps, with photos from up top.
Share the inspection notes if you have them so the contractor knows what to look for.
The pro checks the sheathing, ventilation, insulation depth, exhaust duct terminations, and roof penetrations, taking photos along the way.
The quote shows what needs cleaning and what needs fixing so it stays clean.
You get proof of the work in photos, plus confirmation that the ventilation changes are in place.

One free call gets a local attic mold pro to take a look.
Speak to Dispatch: +1-844-326-4757
Here's what some recent callers shared.

The home inspector flagged black staining on the north side of the roof. The contractor found both bathroom fans venting straight into the attic. They dry ice blasted the decking and ran the ducts out through roof caps.
Every winter we'd get water spots on the bedroom ceiling. Frost was building on the nail tips and melting. They cleared the soffits, installed baffles, and sealed around the can lights. No spots this year.
We were about to replace the roof anyway, so the contractor cleaned the sheathing first and coordinated with the roofer on adding a ridge vent. Good timing saved us a second trip.
The before-and-after photos kept our sale on track. The buyer's agent had questions and the report answered every one of them.
Condensation from household moisture, poor ventilation, and air leaks are the main culprits. Roof leaks can add to it.
It can still damage the roof deck and insulation, and it often becomes an issue when you sell.
Usually not. Most stained sheathing can be cleaned. Replacement is only needed when the wood is soft, delaminated, or structurally compromised.
It's a method that fires dry ice pellets at the surface to knock off growth. The dry ice turns into gas, leaving no water or grit behind, which suits attic sheathing well.
They shouldn't. Ducting them outside is a simple fix that often solves the problem at its source.
Most attic jobs take one to three days, depending on attic size, access, the cleaning method, and how many ventilation corrections are needed.
We route attic mold calls from across Commerce to independent contractors who understand local roof styles and climate.
Common Commerce service zip codes include 75428.
Nearby cities we also serve sit in the list below.
Check Coverage: +1-844-326-4757